Fillerworld Logo Search
NEXT day delivery available - 3pm cut off NEXT day delivery available - 3pm cut off
Worldwide shipping available Worldwide shipping available
Free standard UK delivery on orders over £100 Free standard UK delivery on orders over £100

Why Belotero Filler Behaves Differently in Superficial Skin

This article is written for qualified aesthetic practitioners and is not intended as advice for patients.

Belotero filler is a range of hyaluronic acid (HA) gels made by Merz Aesthetics. What sets it apart from most HA ranges is the way the gel is built: Merz's Cohesive Polydensified Matrix (CPM) process produces a monophasic gel with zones of higher and lower HA density, rather than a uniform block of cross-linked particles. In practice that gives the softer products in the range a reputation for spreading evenly through the dermis, which is why practitioners tend to reach for Belotero when the job is fine, etched lines or thin skin, and why the denser products sit further back in the toolkit for structure and volume.

This piece goes through the current UK range product by product, explains where CPM matters clinically and where it does not, and covers the questions practitioners most often ask before adding Belotero to their stock.

What CPM technology means for the gel in the syringe

Most HA fillers are described by their cross-linking method and particle structure. Merz describes Belotero as the product of a dynamic cross-linking process that leads to a "tailored Cohesive Polydensified Matrix (CPM) consisting of a monophasic gel" (Merz Aesthetics press release, September 2023). On its UK site, Merz says the process "results in different densities of HA, creating a combination of high and low-density zones" (Merz Aesthetics UK).

The useful way to think about this at the chair is cohesivity. A highly cohesive gel holds together as a single unit when extruded and tends to integrate into surrounding tissue rather than sitting as a discrete bolus. That is a benefit in the superficial and mid dermis, where a particulate gel placed too shallow can show as beading or a bluish cast. It is less relevant in deep supraperiosteal placement, where lift capacity and projection matter more than how the gel feathers into the dermis.

So CPM is not a reason to use Belotero everywhere. It is a reason to consider the softer end of the range for indications where surface smoothness is the main outcome you are judged on.

The Belotero filler range, product by product

Merz UK lists seven products in the current portfolio: Soft, Balance, Intense, Volume, Lips Shape, Lips Contour and Revive (Merz Aesthetics UK). Always confirm depth, indication and volume limits against the instructions for use (IFU) supplied with each batch, as indications can differ between markets.

Belotero Soft

The lightest of the classic fillers, intended for fine superficial lines. Typical uses are perioral "barcode" lines, fine lines on the cheek and very light lip-line work. It is placed superficially, usually with a fine needle and a blanching or serial-puncture technique. Because the gel is soft, overcorrection is a common error; small aliquots and a short review interval work better than trying to erase a line in one session.

Belotero Balance

Balance is the product most practitioners associate with the brand. It is positioned for moderate lines and folds in the mid dermis, and it is widely used for perioral lines, the nasolabial fold where only a superficial correction is needed, and the infraorbital region in experienced hands. In the United States, the FDA approved Belotero Balance (+) in 2023 for volume augmentation to improve infraorbital hollows in adults over 21, on the basis of a randomised study of 150 adults (Merz Aesthetics). UK practitioners should check the UK IFU rather than rely on a US approval, but the data is a useful reference point when discussing tear trough options.

Filler World stocks Belotero Balance with Lidocaine (1x1ml), the format most clinics use for perioral and tear trough work.

Belotero Intense

Intense is denser and is aimed at deeper lines and folds and at modest volume restoration. Common uses include deeper nasolabial folds, marionette lines and lip volume where Balance would be too soft to hold shape. It is generally placed in the deep dermis to subcutaneous plane, and many practitioners use a 25G or 27G cannula for the fold work to reduce passes through the dermis.

Belotero Volume

Volume is the structural product in the range, used for midface and temple volume restoration and for contour work where you need lift. It is placed deep, in the subcutaneous or supraperiosteal plane depending on area, and comes as a 2 x 1ml pack. If you already carry a dedicated volumiser from another brand, Volume is less essential than Balance and Soft, because the CPM advantage counts for less at depth.

Belotero Lips Shape and Lips Contour

Both come in 0.6ml syringes, which suits clinics that want to treat lips conservatively without opening a full 1ml. Lips Shape is designed for adding volume to the body of the lip. Lips Contour is designed for definition along the vermilion border and philtral columns. Using them together lets you separate the two goals of a lip treatment rather than compromising with one gel. Filler World supplies Belotero Lips Contour (1x0.6ml) alongside Lips Shape.

Belotero Revive

Revive is a skin booster rather than a volumising filler. It combines HA with glycerol and is intended to improve skin quality, including hydration, elasticity and fine superficial lines, through a course of micro-injections into the superficial dermis. It sits in the same treatment slot as other injectable skin boosters, so the decision is usually about which booster suits your patient base and protocol. See Belotero Revive (1x1ml) for pack details.

Where Belotero earns its place on the shelf

Most clinics do not need the whole range. A practical way to decide is to start with the indications you treat most and ask whether CPM gives you anything your current stock does not.

  • Perioral and fine lines: Soft and Balance are the strongest case for the brand. Superficial placement with an even spread is exactly where a cohesive gel is most useful.
  • Tear trough: Balance is a frequent choice for practitioners who want a soft, low-swelling gel in thin infraorbital skin. Technique and patient selection matter far more than brand here.
  • Lips: the two 0.6ml lip products are attractive for conservative first treatments and top-ups.
  • Midface volume: Volume works, but this is where most practitioners already have a preferred product.

The full selection is on the Belotero collection page.

Technique notes specific to soft, cohesive gels

A few habits help when you switch to Belotero from a firmer, more particulate HA.

Inject less than you think. Soft cohesive gels spread, so the visible correction at the end of a session can understate what settles over the following weeks. Plan a review rather than chasing a full result on the day.

Watch your depth on Soft and Balance. The products tolerate superficial placement better than many gels, but "tolerate" is not "forgive". Placing Balance intradermally in the tear trough is still a recipe for visible product and prolonged swelling. Follow the IFU depth for each product.

Mould gently. Cohesive gels respond to light massage, which is useful for smoothing small irregularities straight after injection. Aggressive moulding can push product out of plane.

Plan complications as you would for any HA. Belotero products are HA-based and therefore hyaluronidase-responsive, but vascular anatomy does not change because the gel is soft. Aspiration is not a reliable safety check on its own, and your clinic should have a written vascular occlusion protocol, an emergency kit in date, and a prescriber available to supply what is needed. Our earlier piece on vascular occlusion warning signs and the first hour response covers this in detail.

Stocking and storage

Store Belotero products according to the temperature range printed on the carton and in the IFU, keep them out of direct light, and do not freeze them. Record the batch number and expiry for every syringe in the patient record; the peel-off labels in the box make this straightforward. Because each syringe is single-use for a single patient, the 0.6ml lip syringes and 1ml Balance are easier to use without waste than larger packs if your lip and perioral volumes are low.

As with any medical device, buy only from a supplier that sources through legitimate distribution channels, and check that the product carries the appropriate UK or CE marking for the market.

Frequently asked questions

Is Belotero a dermal filler?

Yes. Belotero Soft, Balance, Intense, Volume, Lips Shape and Lips Contour are hyaluronic acid dermal fillers. Belotero Revive is part of the same brand but works as a skin booster for skin quality rather than as a volumising filler.

Which Belotero product is used for the tear trough?

Belotero Balance is the product most practitioners use in the infraorbital area, and in the US its lidocaine version holds an FDA approval for infraorbital hollows. In the UK, check the current IFU for approved indications, and only treat this area once you have the anatomical training and complication management in place.

How long does Belotero filler last?

Duration depends on the product, the area, the volume injected and the patient's metabolism. Softer products in mobile or superficial areas generally last less time than denser products placed deep. Refer to the manufacturer's IFU and clinical literature for product-specific data, and avoid quoting fixed durations to patients.

Is a skin booster better than filler?

They do different jobs. A skin booster such as Belotero Revive is designed to improve hydration, texture and fine lines across an area. A filler restores volume or corrects a specific line or fold. Many treatment plans combine both, for example Revive for overall skin quality and Balance for a deeper perioral line.

How does Belotero compare with other HA filler brands?

The main difference is the CPM gel structure, which favours even integration in the superficial and mid dermis. For deep structural work, the advantage is smaller, and choice often comes down to rheology, familiarity and cost. Our comparison of lip filler brands covers how several ranges differ.

Summary

Belotero's strongest case rests on its softer products. Balance and Soft give you a cohesive gel that behaves predictably in thin skin and fine lines, and the 0.6ml lip syringes make conservative lip work simple. Intense and Volume are solid but face more competition at depth. If you treat a lot of perioral lines or tear troughs, Balance is the obvious place to start, with the rest of the range added as your caseload justifies it.

Stay in the Glow!

Subscribe for Exclusive Deals & the Latest Aesthetic Trends

Basket
Orders placed before 3PM will be dispatched the same day. Products For Professional Use Only.