Fillerworld Logo Search
NEXT day delivery available - 3pm cut off NEXT day delivery available - 3pm cut off
Worldwide shipping available Worldwide shipping available
Free standard UK delivery on orders over £100 Free standard UK delivery on orders over £100

Radiesse: A UK Practitioner's Guide to CaHA Filler

This article is intended for qualified aesthetic practitioners in the UK. It is educational content, not patient advice, and does not replace the manufacturer's Instructions for Use or your own clinical training.

Radiesse is a calcium hydroxylapatite (CaHA) injectable from Merz Aesthetics that sits somewhere between a volumising filler and a biostimulator. Used neat, it gives structural support in the mid and lower face; diluted, it is used across broader areas such as the décolleté and the backs of the hands to work on skin quality rather than volume. If you already inject hyaluronic acid (HA) and are weighing up whether to add Radiesse to your clinic, the key differences are in how it behaves in tissue, how you prepare it, and what you can (and cannot) do if something goes wrong.

This guide covers the composition, the current UK indications, neat versus diluted and hyperdilute protocols, how Radiesse compares with Sculptra and HA fillers, and the practical points that matter when you order it for your clinic.

What is Radiesse?

According to Merz Aesthetics UK, Radiesse and Radiesse+ are biostimulators made of calcium hydroxylapatite microspheres suspended in a sodium carboxymethylcellulose gel. The two components do different jobs. The gel carrier provides immediate correction and is gradually absorbed. The CaHA microspheres remain as a scaffold that the body responds to, and that response is what gives the product its biostimulatory reputation.

That dual action is why many injectors describe Radiesse as a "filler with a second phase". The patient sees a lift on the day, and the tissue response develops over the following months. It is also firmer than a cross-linked HA gel and less forgiving of superficial placement.

Radiesse vs Radiesse+

Merz supplies two versions in the UK. Radiesse+ contains lidocaine for patient comfort, while standard Radiesse does not. Choosing between them usually comes down to the indication and whether you intend to dilute. Standard Radiesse is the version Merz lists for the décolleté indication with a 1:2 saline dilution, and it gives you full control over what goes into the syringe when you prepare a dilution. Filler World stocks both Radiesse 1.5ml and Radiesse with Lidocaine 1.5ml.

UK indications and treatment areas

Merz UK states that Radiesse and Radiesse+ are intended for deep dermal and sub-dermal soft tissue augmentation of the facial area and the dorsum of the hands. The treatment areas it lists are:

  • Radiesse: nasolabial folds, cheek augmentation, dorsum of the hands and, diluted 1:2 with 0.9% sterile saline, moderate and severe décolleté wrinkles.
  • Radiesse+: nasolabial folds, cheek augmentation, marionette lines, jawline and dorsum of the hands.

The lips and the periorbital area do not appear on that list, and most experienced injectors treat them as no-go zones for CaHA. The tear trough is thin-skinned and highly mobile, and a firm, non-dissolvable product placed there is difficult to correct. For those areas an HA product remains the sensible choice, as covered in our guide to the best filler for tear trough.

Neat Radiesse: structural work in the face

Used undiluted, Radiesse is a structural product. Typical uses include support over the zygoma and mid-cheek, the pre-jowl sulcus and jawline, and deep nasolabial folds where you want lift rather than a soft fill. Because of its rheology, placement is deep: supraperiosteal boluses on bone, or a deep subcutaneous plane with a cannula for linear threading along the mandible.

A few practical points that come up repeatedly in training:

  • Depth matters more than with HA. Superficial CaHA can show as a visible or palpable ridge and is not easily dissolved. If you are unsure of your plane, go deeper.
  • Massage is part of the technique. Moulding after injection helps the product sit evenly. Brief your patient on what to expect in the first few days.
  • Under-correct. Since part of the result builds over time, aiming for a full correction on the day can leave the patient overdone later. Planning a review appointment works better than chasing the final result in one session.
  • Cannula or needle. Many injectors favour a 25G or 22G cannula for the jawline and lower face to reduce the number of entry points and lower the risk of intravascular injection. Our cannulas collection includes the common gauges and lengths.

Diluted and hyperdilute Radiesse

Hyperdilute Radiesse is a big part of why the product has grown in popularity. Mixing CaHA with saline (and, in some protocols, lidocaine) reduces its volumising effect and lets you spread it across a larger surface. The goal is to improve laxity and skin quality rather than add shape. Common areas include the neck, décolleté, upper arms, abdomen and the dorsum of the hands.

The one dilution currently listed by Merz UK is 1:2 with 0.9% sterile saline for décolleté wrinkles. Beyond that, a body of expert consensus work exists, most notably the Global Consensus Guidelines for the Injection of Diluted and Hyperdiluted Calcium Hydroxylapatite for Skin Tightening, which many UK trainers use as a reference point for dilution ratios, injection technique and patient selection. If you treat off-indication areas or use higher dilutions than the IFU lists, make sure your training, consent process and insurance cover what you are doing.

Preparing a dilution

Dilution is normally done with a sterile luer-lock connector between the Radiesse syringe and a second syringe holding the diluent, passing the mixture back and forth until it is uniform. Points to keep in mind:

  • Use a strictly aseptic technique and prepare immediately before treatment.
  • Record the exact dilution ratio, diluent and batch number in the patient notes.
  • Deliver in a subdermal plane, usually by fanning with a cannula. Spreading the product evenly matters more than total volume.
  • Do not reuse product between patients. Anything left over should be discarded in line with your clinical waste procedures.

Radiesse vs Sculptra

"Radiesse vs Sculptra" is one of the most common searches around this product, and patients increasingly ask about it. Both are biostimulators, but they behave quite differently in clinic.

Radiesse gives an immediate visible effect from its gel carrier, while poly-L-lactic acid (PLLA) products such as Sculptra give little visible change on the day and depend on a course of treatments to build the result. PLLA has to be reconstituted well in advance of injection. Radiesse comes ready to use neat, or you dilute it chairside. Some injectors choose PLLA for global volume loss and temple hollowing over several sessions, and Radiesse for focal structural support plus hyperdilute skin-quality work. If PLLA is on your list, our PLLA filler guide and the PLLA stimulators collection cover the options.

Radiesse vs hyaluronic acid fillers

The most important clinical difference is reversibility. HA fillers can be broken down with hyaluronidase. CaHA cannot, because the enzyme acts on hyaluronic acid, not on calcium hydroxylapatite or the carboxymethylcellulose carrier. In practice that means:

  • Your vascular occlusion protocol must reflect the product you are using. Know the vascular anatomy of every area you treat, aspirate where appropriate, inject slowly with low pressure, and keep your emergency kit and escalation pathway current.
  • Nodules from superficial placement are managed differently from HA nodules and may need specialist input.
  • Patient selection and consent should explicitly cover the fact that the product is not dissolvable.

CaHA is also radiopaque. It can show up on X-ray and CT, so it is good practice to tell patients and to record treatment areas clearly in case they later have imaging.

For practitioners who want the handling of HA with some CaHA-driven stimulation, hybrid products are an alternative. Our HArmonyCa guide looks at that category in detail.

Patient selection, consent and records

Good outcomes with Radiesse come down to choosing the right patient as much as the right technique. Patients who suit it are usually those with moderate volume loss or laxity who are happy with a gradual result. Patients who want an instantly reversible option, or who are anxious about permanence, are often better served by HA.

Your consent conversation should cover the two-phase nature of the result, the fact that the product is not dissolvable, the realistic range of outcomes, common side effects such as swelling, bruising, tenderness and palpable product, and rarer complications including nodules and vascular events. Avoid promising specific results or a fixed duration. Manufacturers describe Radiesse as long-lasting, but how long it lasts in a given patient depends on the area treated, the dilution, the patient's metabolism and your technique.

Keep detailed records: product, batch and expiry, volume, dilution, plane, device (needle or cannula, gauge and length), and the areas treated. Photography taken under consistent lighting supports clinical review and medico-legal protection. It is a clinical record, not marketing material.

Buying and storing Radiesse for your clinic

Buy only from suppliers who can guarantee genuine, traceable stock with batch numbers intact. Check that the packaging is sealed and in date when it arrives, and store it at the temperature range stated in the IFU, away from heat sources and direct sunlight.

Frequently asked questions

What is Radiesse made of?

Radiesse is made of calcium hydroxylapatite microspheres suspended in a sodium carboxymethylcellulose gel. Radiesse+ adds lidocaine for comfort.

Is Radiesse a dermal filler or a biostimulator?

It is both. The gel carrier gives immediate correction like a filler, and Merz describes the product as a biostimulator because of the tissue response the CaHA microspheres trigger over time. Diluting it shifts the balance towards biostimulation.

How long does Radiesse last?

Merz describes the results as long-lasting but does not give one figure that applies to every patient. Duration varies with the treatment area, the dilution, the patient and the technique. Check the current IFU and set realistic expectations at consultation rather than promising a fixed timeframe.

Can Radiesse be dissolved?

No. Hyaluronidase breaks down hyaluronic acid, not calcium hydroxylapatite, so Radiesse cannot be dissolved the way HA filler can. This is why deep placement, careful patient selection and a robust complications protocol are essential.

Is Radiesse better than Juvederm?

Neither is better overall; they do different jobs. Juvederm is an HA range with products for many areas, including the lips, and it can be reversed. Radiesse suits deep structural support and hyperdilute skin-quality work but is not dissolvable and is not used in the lips. Many clinics stock both.

Conclusion

Radiesse is worth adding to your clinic if you already have strong HA skills and want a product that combines immediate structural support with longer-term tissue stimulation, plus the option of hyperdilute work on the neck, décolleté and hands. Its strengths come with real responsibilities: precise deep placement, a complications protocol that does not rely on hyaluronidase, and honest consent. Get those right, and it becomes a versatile part of your treatment menu.

Stay in the Glow!

Subscribe for Exclusive Deals & the Latest Aesthetic Trends

Basket
Orders placed before 3PM will be dispatched the same day. Products For Professional Use Only.